Form factor comparator

Put up to three sizes side by side. Each value is computed in your browser with the first-order models of the PocketQube review, for a spacecraft at the mass limit of its standard.

Form factors (up to 3)
PocketQube
CubeSat
Other
km
Solar activity

F10.7 = 140 sfu, Ap = 12

50
1P50 × 50 × 50 mm
178
3P50 × 50 × 178 mm
113.5
1U100 × 100 × 113.5 mm

Isometric, common scale 0.99 px/mm

Comparison of the selected form factors
Quantity1PPocketQube3PPocketQube1UCubeSat
Envelope(mm)50 × 50 × 5050 × 50 × 178100 × 100 × 113.5
Volume(cm³)1254451,135
Mass limit(kg)Mass limit of the standard; a typical value where the standard sets none.0.250.752.00
Bulk density at the limit(g/cm³)2.001.691.76
External surface(cm²)150406654
Surface per gram(cm²/g)0.600.540.33
Mean projected area(cm²)37.5101.5163.5
Ballistic parameter(m²/kg)C_D·A/m with C_D = 2.2 and the mean tumbling area A_tot/4.0.03300.02980.0180
Orbit-average power(W)Eq. 1: body-mounted triple-junction cells (η = 0.28), packing factor 0.6, eclipse at β = 0° for the chosen altitude.0.531.442.33
Specific power(W/kg)2.131.931.16
Thermal time constant(min)Eq. 2: c_p = 900 J/(kg·K), ε = 0.8, T₀ = 290 K.5663104
Principal moments of inertia(kg·m²)Homogeneous box; smallest and largest principal moments.1.0 × 10⁻⁴3.1 × 10⁻⁴ – 2.1 × 10⁻³3.3 × 10⁻³ – 3.8 × 10⁻³
Lifetime from 500 kmKennewell density model, re-entry at 180 km.20.4 months22.6 months3.1 years
Highest altitude for a five-year lifetime(km)559553525
Δv per year to hold 500 km(m/s)17169.4
StandardPocketQube Standard, Issue 1 (2018)PocketQube Standard, Issue 1 (2018)CubeSat Design Specification Rev. 14.1 (2022)
DeployersAlbaPod, MRFOD, PicoBusAlbaPodP-POD, ISIPOD, NRCSD, EXOpod

Assumptions

  • Spacecraft at the mass limit of its standard, homogeneous, tumbling randomly; drag coefficient 2.2 and mean projected area A_tot/4.
  • Lifetime from a circular orbit with the Kennewell density model at constant solar activity; re-entry at 180 km.
  • Body-mounted power from Eq. 1 of the review; deployable arrays and pointing are not modelled.
  • These are first-order estimates for comparing sizes. Mission analysis needs empirical atmosphere models, solar-cycle forecasts and real mass properties.